diff --git a/include/asm-blackfin/cplbtab.h b/include/asm-blackfin/cplbtab.h
index dc6aee2..ab7d989 100644
--- a/include/asm-blackfin/cplbtab.h
+++ b/include/asm-blackfin/cplbtab.h
@@ -3,9 +3,9 @@
  *
  * Blackfin BF533/2.6 support : LG Soft India
  * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd
- * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's 
+ * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's
  *	        shouldn't be victimized. cplbmgr.S search logic is corrected
- *	        to findout the appropriate victim.	
+ *	        to findout the appropriate victim.
  *	     2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC
  *	     : LG Soft India
  */
@@ -15,12 +15,12 @@
 #define __ARCH_BFINNOMMU_CPLBTAB_H
 
 /*************************************************************************
- *  			ICPLB TABLE					  	
+ *  			ICPLB TABLE
  *************************************************************************/
 
 .data
 
-/* This table is configurable */ 	
+/* This table is configurable */
 
 .align 4;
 
@@ -33,7 +33,7 @@
 
 /*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
 
-#define ANOMALY_05000158		0x200	
+#define ANOMALY_05000158		0x200
 #ifdef CONFIG_BLKFIN_WB 	/*Write Back Policy */
 	#define SDRAM_DGENERIC  	(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
 	#define SDRAM_DNON_CHBL         (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
@@ -45,14 +45,14 @@
 	#define SDRAM_DGENERIC 		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
 	#define SDRAM_DNON_CHBL         (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158)
 	#define SDRAM_DKERNEL 		(PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158)
-	#define L1_DMEMORY		(PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)	
+	#define L1_DMEMORY		(PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158)
 	#define SDRAM_EBIU		(PAGE_SIZE_1MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158)
-#endif 
+#endif
 
 .global icplb_table
 icplb_table:
 .byte4 0xFFA00000;
-.byte4 (L1_IMEMORY);	
+.byte4 (L1_IMEMORY);
 .byte4 0x00000000;
 .byte4 (SDRAM_IKERNEL);			/*SDRAM_Page1*/
 .byte4 0x00400000;
@@ -174,20 +174,20 @@
 .byte4 0xffffffff;                    /* end of section - termination*/
 
 /*********************************************************************
- *			DCPLB TABLE		
+ *			DCPLB TABLE
  ********************************************************************/
 
 .global dcplb_table
 dcplb_table:
 .byte4	0x00000000;
 .byte4	(SDRAM_DKERNEL);	/*SDRAM_Page1*/
-.byte4	0x00400000; 
+.byte4	0x00400000;
 .byte4	(SDRAM_DKERNEL);	/*SDRAM_Page1*/
 .byte4	0x07C00000;
 .byte4	(SDRAM_DKERNEL);	/*SDRAM_Page15*/
-.byte4	0x00800000; 
+.byte4	0x00800000;
 .byte4 	(SDRAM_DGENERIC);	/*SDRAM_Page2*/
-.byte4 	0x00C00000; 
+.byte4 	0x00C00000;
 .byte4	(SDRAM_DGENERIC);	/*SDRAM_Page3*/
 .byte4	0x01000000;
 .byte4	(SDRAM_DGENERIC);	/*SDRAM_Page4*/
@@ -197,7 +197,7 @@
 .byte4	(SDRAM_DGENERIC);	/*SDRAM_Page6*/
 .byte4	0x01C00000;
 .byte4	(SDRAM_DGENERIC);	/*SDRAM_Page7*/
-#ifndef CONFIG_EZKIT	
+#ifndef CONFIG_EZKIT
 .byte4	0x02000000;
 .byte4	(SDRAM_DGENERIC);	/*SDRAM_Page8*/
 .byte4	0x02400000;
@@ -217,7 +217,7 @@
 
 /**********************************************************************
  *		PAGE DESCRIPTOR TABLE
- * 
+ *
  **********************************************************************/
 
 /* Till here we are discussing about the static memory management model.
@@ -225,15 +225,15 @@
  * descriptors to cover the entire addressable memory than will fit into
  * the available on-chip 16 CPLB MMRs. When this happens, the below table
  * will be used which will hold all the potentially required CPLB descriptors
- * 
+ *
  * This is how Page descriptor Table is implemented in uClinux/Blackfin.
- */   
+ */
 .global dpdt_table
 dpdt_table:
 #ifdef CONFIG_CPLB_INFO
 .byte4        0x00000000;
 .byte4        (SDRAM_DKERNEL);        /*SDRAM_Page0*/
-.byte4        0x00400000; 
+.byte4        0x00400000;
 .byte4        (SDRAM_DKERNEL);        /*SDRAM_Page1*/
 #endif
 .byte4        0x00800000;
@@ -271,12 +271,12 @@
 .byte4	(SDRAM_EBIU);	/* Async Memory Bank 2 (Secnd)*/
 .byte4	0x20100000;
 .byte4	(SDRAM_EBIU);	/* Async Memory Bank 1 (Prim B)*/
-.byte4	0x20000000;	
+.byte4	0x20000000;
 .byte4	(SDRAM_EBIU);	/* Async Memory Bank 0 (Prim A)*/
 .byte4	0x20300000;		/*Fix for Network*/
 .byte4  (SDRAM_EBIU);	/*Async Memory bank 3*/
 
-#ifdef CONFIG_STAMP	
+#ifdef CONFIG_STAMP
 .byte4	0x04000000;
 .byte4  (SDRAM_DGENERIC);
 .byte4	0x04400000;
diff --git a/include/asm-blackfin/cpu/bf533_irq.h b/include/asm-blackfin/cpu/bf533_irq.h
index 902308a..9c5230d 100644
--- a/include/asm-blackfin/cpu/bf533_irq.h
+++ b/include/asm-blackfin/cpu/bf533_irq.h
@@ -81,7 +81,7 @@
 
 /* The ABSTRACT IRQ definitions */
 
-/* The first seven of the following are fixed, 
+/* The first seven of the following are fixed,
  * the rest you change if you need to
  */
 
diff --git a/include/asm-blackfin/cpu/defBF532.h b/include/asm-blackfin/cpu/defBF532.h
index c30d5cd..26a5fe6 100644
--- a/include/asm-blackfin/cpu/defBF532.h
+++ b/include/asm-blackfin/cpu/defBF532.h
@@ -30,7 +30,7 @@
 /* include all Core registers and bit definitions */
 #include <asm/cpu/def_LPBlackfin.h>
 
-/* Helper macros 
+/* Helper macros
  * usage:
  *  P0.H = HI(UART_THR);
  *  P0.L = LO(UART_THR);
@@ -789,7 +789,7 @@
 #define ERR_TYP_P0		0x0E
 #define ERR_TYP_P1		0x0F
 
-/* 
+/*
  * PROGRAMMABLE FLAG MASKS
  */
 
diff --git a/include/asm-blackfin/cpu/def_LPBlackfin.h b/include/asm-blackfin/cpu/def_LPBlackfin.h
index 11a6504..9ac78c8 100644
--- a/include/asm-blackfin/cpu/def_LPBlackfin.h
+++ b/include/asm-blackfin/cpu/def_LPBlackfin.h
@@ -21,7 +21,7 @@
 #ifndef _DEF_LPBLACKFIN_H
 #define _DEF_LPBLACKFIN_H
 
-/* 
+/*
  * #if !defined(__ADSPLPBLACKFIN__)
  * #warning def_LPBlackfin.h should only be included for 532 compatible chips.
  * #endif
@@ -344,9 +344,9 @@
 /* ** Masks */
 #define ENDM			0x00000001	/* (doesn't really exist) Enable Data Memory L1 */
 #define ENDCPLB			0x00000002	/* Enable DCPLB */
-#define ASRAM_BSRAM		0x00000000	
+#define ASRAM_BSRAM		0x00000000
 #define ACACHE_BSRAM		0x00000008
-#define ACACHE_BCACHE		0x0000000C  
+#define ACACHE_BCACHE		0x0000000C
 #define DCBS			0x00000010	/*  L1 Data Cache Bank Select */
 #define PORT_PREF0		0x00001000	/* DAG0 Port Preference */
 #define PORT_PREF1		0x00002000	/* DAG1 Port Preference */
diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h
index 45e34b5..262473f 100644
--- a/include/asm-blackfin/page_offset.h
+++ b/include/asm-blackfin/page_offset.h
@@ -22,7 +22,7 @@
  * MA 02111-1307 USA
  */
 
-/* 
+/*
  * Changes made by Akbar Hussain April 10, 2001
  */
 
diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h
index 84b4b4e..8578166 100644
--- a/include/asm-blackfin/uaccess.h
+++ b/include/asm-blackfin/uaccess.h
@@ -3,7 +3,7 @@
  *
  * Copyright (c) 2005 blackfin.uclinux.org
  *
- * This file is based on 
+ * This file is based on
  * Based on: include/asm-m68knommu/uaccess.h
  * Changes made by Lineo Inc.    May 2001
  *
diff --git a/include/configs/ezkit533.h b/include/configs/ezkit533.h
index a52af4e..5eda673 100644
--- a/include/configs/ezkit533.h
+++ b/include/configs/ezkit533.h
@@ -9,111 +9,111 @@
 #define CONFIG_DRIVER_SMC91111	1
 #define CONFIG_SMC91111_BASE	0x20310300
 #if 0
-#define	CONFIG_MII
+#define CONFIG_MII
 #define CFG_DISCOVER_PHY
 #endif
 
 #define CONFIG_RTC_BF533	1
 #define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
 
-/* CONFIG_CLKIN_HZ is any value in Hz                            */
-#define CONFIG_CLKIN_HZ          27000000
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN      */
-/*                                                  1=CLKIN/2    */
-#define CONFIG_CLKIN_HALF               0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass  */
-/*                                               1=bypass PLL    */
-#define CONFIG_PLL_BYPASS               0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.   */
-/* Values can range from 1-64                                    */
+/* CONFIG_CLKIN_HZ is any value in Hz				 */
+#define CONFIG_CLKIN_HZ		 27000000
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	 */
+/*						    1=CLKIN/2	 */
+#define CONFIG_CLKIN_HALF		0
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	 */
+/*						 1=bypass PLL	 */
+#define CONFIG_PLL_BYPASS		0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.	 */
+/* Values can range from 1-64					 */
 #define CONFIG_VCO_MULT			22
-/* CONFIG_CCLK_DIV controls what the core clock divider is       */
-/* Values can be 1, 2, 4, or 8 ONLY                              */
+/* CONFIG_CCLK_DIV controls what the core clock divider is	 */
+/* Values can be 1, 2, 4, or 8 ONLY				 */
 #define CONFIG_CCLK_DIV			1
 /* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
-/* Values can range from 1-15                                    */
+/* Values can range from 1-15					 */
 #define CONFIG_SCLK_DIV			5
 
 #if ( CONFIG_CLKIN_HALF == 0 )
-#define CONFIG_VCO_HZ           ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
+#define CONFIG_VCO_HZ		( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
 #else
-#define CONFIG_VCO_HZ           (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
+#define CONFIG_VCO_HZ		(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
 #endif
 
 #if (CONFIG_PLL_BYPASS == 0)
-#define CONFIG_CCLK_HZ          ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
-#define CONFIG_SCLK_HZ          ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
+#define CONFIG_CCLK_HZ		( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
+#define CONFIG_SCLK_HZ		( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
 #else
-#define CONFIG_CCLK_HZ          CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ          CONFIG_CLKIN_HZ
+#define CONFIG_CCLK_HZ		CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ		CONFIG_CLKIN_HZ
 #endif
 
-#define CONFIG_MEM_SIZE                 32             /* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH              9             /* 8, 9, 10, 11    */
-#define CONFIG_MEM_MT48LC16M16A2TG_75    1
+#define CONFIG_MEM_SIZE			32	       /* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH		 9	       /* 8, 9, 10, 11	  */
+#define CONFIG_MEM_MT48LC16M16A2TG_75	 1
 
 #define CONFIG_LOADS_ECHO	1
 
 
-#define CONFIG_COMMANDS			(CONFIG_CMD_DFL	| \
+#define CONFIG_COMMANDS			(CONFIG_CMD_DFL | \
 					 CFG_CMD_PING	| \
 					 CFG_CMD_ELF	| \
 					 CFG_CMD_I2C	| \
 					 CFG_CMD_JFFS2	| \
 					 CFG_CMD_DATE)
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off"	
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off"
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
-#define	CFG_PROMPT		"ezkit> "	/* Monitor Command Prompt */
+#define CFG_PROMPT		"ezkit> "	/* Monitor Command Prompt */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
 #else
-#define	CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size */
 #endif
-#define	CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define	CFG_MAXARGS		16	/* max number of command args */
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args */
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
 #define CFG_MEMTEST_START	0x00100000	/* memtest works on */
 #define CFG_MEMTEST_END		0x01F00000	/* 1 ... 31 MB in DRAM */
-#define	CFG_LOAD_ADDR		0x01000000	/* default load address */
-#define	CFG_HZ			1000	/* decrementer freq: 10 ms ticks */
+#define CFG_LOAD_ADDR		0x01000000	/* default load address */
+#define CFG_HZ			1000	/* decrementer freq: 10 ms ticks */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_SDRAM_BASE		0x00000000
 #define CFG_MAX_RAM_SIZE	0x02000000
 #define CFG_FLASH_BASE		0x20000000
 
-#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MONITOR_BASE	(CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 #define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
 #define CFG_GBL_DATA_SIZE	0x4000
 #define CFG_GBL_DATA_ADDR	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
 #define CONFIG_STACKBASE	(CFG_GBL_DATA_ADDR  - 4)
 
-#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 #define CFG_FLASH0_BASE		0x20000000
 #define CFG_FLASH1_BASE		0x20200000
 #define CFG_FLASH2_BASE		0x20280000
 #define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks */
 #define CFG_MAX_FLASH_SECT	40	/* max number of sectors on one chip */
 
-#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_ADDR		0x20020000
-#define	CFG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE	0x10000 /* Total Size of Environment Sector */
 
 /* JFFS Partition offset set  */
 #define CFG_JFFS2_FIRST_BANK 0
 #define CFG_JFFS2_NUM_BANKS  1
 /* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR                 11
+#define CFG_JFFS2_FIRST_SECTOR		       11
 
 
 /*
  * Stack sizes
  */
-#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
 
 #define POLL_MODE		1
 #define FLASH_TOT_SECT		40
@@ -123,7 +123,7 @@
 /*
  * Initialize PSD4256 registers for using I2C
  */
-#define	CONFIG_MISC_INIT_R
+#define CONFIG_MISC_INIT_R
 
 /*
  * I2C settings
@@ -144,7 +144,7 @@
 							*pFIO_FLAG_S = PF_SDA; \
 							asm("ssync;"); \
 						} \
-					else    { \
+					else	{ \
 							*pFIO_FLAG_C = PF_SDA; \
 							asm("ssync;"); \
 						}
@@ -152,7 +152,7 @@
 							*pFIO_FLAG_S = PF_SCL; \
 							asm("ssync;"); \
 						} \
-					else    { \
+					else	{ \
 							*pFIO_FLAG_C = PF_SCL; \
 							asm("ssync;"); \
 						}
@@ -166,15 +166,15 @@
 #define __ADSPBF533__		1
 
 /* 0xFF, 0x7BB07BB0, 0x22547BB0 */
-/* #define AMGCTLVAL            (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
-#define AMBCTL0VAL              (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL |    \
-                                ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
-#define AMBCTL1VAL              (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN |   \
-                                B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
+/* #define AMGCTLVAL		(AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
+#define AMBCTL0VAL		(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL |	\
+				~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
+#define AMBCTL1VAL		(B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN |	\
+				B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
 */
-#define AMGCTLVAL               0xFF
-#define AMBCTL0VAL              0x7BB07BB0
-#define AMBCTL1VAL              0xFFC27BB0
+#define AMGCTLVAL		0xFF
+#define AMBCTL0VAL		0x7BB07BB0
+#define AMBCTL1VAL		0xFFC27BB0
 
 #define CONFIG_VDSP		1
 
diff --git a/include/configs/stamp.h b/include/configs/stamp.h
index 1402a41..248ca70 100644
--- a/include/configs/stamp.h
+++ b/include/configs/stamp.h
@@ -17,7 +17,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -40,7 +40,7 @@
 #define CONFIG_RTC_BF533		1
 
 /* FLASH/ETHERNET uses the same address range */
-#define SHARED_RESOURCES 		1
+#define SHARED_RESOURCES		1
 
 #define CONFIG_VDSP			1
 
@@ -49,37 +49,37 @@
  *
  */
 
-/* CONFIG_CLKIN_HZ is any value in Hz                            */
+/* CONFIG_CLKIN_HZ is any value in Hz				 */
 #define CONFIG_CLKIN_HZ			11059200
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN      */
-/*                                                  1=CLKIN/2    */
+/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	 */
+/*						    1=CLKIN/2	 */
 #define CONFIG_CLKIN_HALF		0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass  */
-/*                                               1=bypass PLL    */
-#define CONFIG_PLL_BYPASS       	0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.   */
-/* Values can range from 1-64                                    */
+/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	 */
+/*						 1=bypass PLL	 */
+#define CONFIG_PLL_BYPASS		0
+/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.	 */
+/* Values can range from 1-64					 */
 #define CONFIG_VCO_MULT			45
-/* CONFIG_CCLK_DIV controls what the core clock divider is       */
-/* Values can be 1, 2, 4, or 8 ONLY                              */
+/* CONFIG_CCLK_DIV controls what the core clock divider is	 */
+/* Values can be 1, 2, 4, or 8 ONLY				 */
 #define CONFIG_CCLK_DIV			1
 /* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
-/* Values can range from 1-15                                    */
+/* Values can range from 1-15					 */
 #define CONFIG_SCLK_DIV			6
 
 /*
  * Network Settings
  */
 /* network support */
-#define CONFIG_IPADDR           192.168.0.15
-#define CONFIG_NETMASK          255.255.255.0
-#define CONFIG_GATEWAYIP        192.168.0.1
-#define CONFIG_SERVERIP         192.168.0.2
-#define CONFIG_HOSTNAME         STAMP
+#define CONFIG_IPADDR		192.168.0.15
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_GATEWAYIP	192.168.0.1
+#define CONFIG_SERVERIP		192.168.0.2
+#define CONFIG_HOSTNAME		STAMP
 #define CONFIG_ROOTPATH			/checkout/uClinux-dist/romfs
 
 /* To remove hardcoding and enable MAC storage in EEPROM  */
-/* #define CONFIG_ETHADDR               02:80:ad:20:31:b8 */
+/* #define CONFIG_ETHADDR		02:80:ad:20:31:b8 */
 
 /*
  * Command settings
@@ -90,17 +90,17 @@
 
 #define CONFIG_BOOTDELAY		5
 #define CONFIG_BOOT_RETRY_TIME		-1	/* Enable this if bootretry required, currently its disabled */
-#define CONFIG_BOOTCOMMAND 		"run ramboot"
+#define CONFIG_BOOTCOMMAND		"run ramboot"
 #define CONFIG_AUTOBOOT_PROMPT		"autoboot in %d seconds\n"
 
-#define CONFIG_COMMANDS			(CONFIG_CMD_DFL	| \
+#define CONFIG_COMMANDS			(CONFIG_CMD_DFL | \
 					 CFG_CMD_PING	| \
 					 CFG_CMD_ELF	| \
 					 CFG_CMD_I2C	| \
 					 CFG_CMD_CACHE	| \
-					 CFG_CMD_JFFS2  | \
+					 CFG_CMD_JFFS2	| \
 					 CFG_CMD_DATE)
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"	
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"
 
 #define CONFIG_EXTRA_ENV_SETTINGS												\
 	"ramargs=setenv bootargs root=/dev/mtdblock0 rw\0"							\
@@ -127,14 +127,14 @@
 #define CONFIG_BAUDRATE			57600
 #define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CFG_PROMPT			"stamp>"	/* Monitor Command Prompt */
+#define CFG_PROMPT			"stamp>"	/* Monitor Command Prompt */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define	CFG_CBSIZE			1024	/* Console I/O Buffer Size */
+#define CFG_CBSIZE			1024	/* Console I/O Buffer Size */
 #else
-#define	CFG_CBSIZE			256	/* Console I/O Buffer Size */
+#define CFG_CBSIZE			256	/* Console I/O Buffer Size */
 #endif
-#define	CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
-#define	CFG_MAXARGS			16	/* max number of command args */
+#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS			16	/* max number of command args */
 #define CFG_BARGSIZE			CFG_CBSIZE	/* Boot Argument Buffer Size */
 
 #define CONFIG_LOADS_ECHO		1
@@ -154,9 +154,9 @@
  *
  */
 
-#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
-#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
-#define	CFG_FLASH_CFI_AMD_RESET
+#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
+#define CFG_FLASH_CFI_AMD_RESET
 
 #define CFG_ENV_IS_IN_FLASH		1
 
@@ -165,8 +165,8 @@
 #define CFG_MAX_FLASH_SECT		67		/* max number of sectors on one chip */
 
 #define CFG_ENV_ADDR			0x20020000
-#define	CFG_ENV_SIZE			0x10000
-#define CFG_ENV_SECT_SIZE 		0x10000	/* Total Size of Environment Sector */
+#define CFG_ENV_SIZE			0x10000
+#define CFG_ENV_SECT_SIZE		0x10000 /* Total Size of Environment Sector */
 
 #define CFG_FLASH_ERASE_TOUT		30000	/* Timeout for Chip Erase (in ms) */
 #define CFG_FLASH_ERASEBLOCK_TOUT	5000	/* Timeout for Block Erase (in ms) */
@@ -176,10 +176,10 @@
 #define CFG_JFFS2_FIRST_BANK 0
 #define CFG_JFFS2_NUM_BANKS  1
 /* 512k reserved for u-boot */
-#define CFG_JFFS2_FIRST_SECTOR 		11
+#define CFG_JFFS2_FIRST_SECTOR		11
 
-/* 
- * following timeouts shall be used once the 
+/*
+ * following timeouts shall be used once the
  * Flash real protection is enabled
  */
 #define CFG_FLASH_LOCK_TOUT		5	/* Timeout for Flash Set Lock Bit (in ms) */
@@ -204,7 +204,7 @@
 							*pFIO_FLAG_S = PF_SDA; \
 							asm("ssync;"); \
 						} \
-					else    { \
+					else	{ \
 							*pFIO_FLAG_C = PF_SDA; \
 							asm("ssync;"); \
 						}
@@ -212,7 +212,7 @@
 							*pFIO_FLAG_S = PF_SCL; \
 							asm("ssync;"); \
 						} \
-					else    { \
+					else	{ \
 							*pFIO_FLAG_C = PF_SCL; \
 							asm("ssync;"); \
 						}
@@ -236,9 +236,9 @@
 /*
  * IDE/ATA stuff
  */
-#undef  CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
-#undef  CONFIG_IDE_LED			/* no led for ide supported */
-#undef  CONFIG_IDE_RESET		/* no reset for ide supported */
+#undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
+#undef	CONFIG_IDE_LED			/* no led for ide supported */
+#undef	CONFIG_IDE_RESET		/* no reset for ide supported */
 
 #define CFG_IDE_MAXBUS	1		/* max. 1 IDE busses */
 #define CFG_IDE_MAXDEVICE		(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
@@ -246,9 +246,9 @@
 #define CFG_ATA_BASE_ADDR		0x20200000
 #define CFG_ATA_IDE0_OFFSET		0x0000
 
-#define CFG_ATA_DATA_OFFSET		0x0020  /* Offset for data I/O */
-#define CFG_ATA_REG_OFFSET		0x0020  /* Offset for normal register accesses */
-#define CFG_ATA_ALT_OFFSET		0x0007  /* Offset for alternate registers */
+#define CFG_ATA_DATA_OFFSET		0x0020	/* Offset for data I/O */
+#define CFG_ATA_REG_OFFSET		0x0020	/* Offset for normal register accesses */
+#define CFG_ATA_ALT_OFFSET		0x0007	/* Offset for alternate registers */
 
 #define CFG_ATA_STRIDE			2
 #endif
@@ -258,23 +258,20 @@
  *
  */
 
-#define CONFIG_MEM_SIZE			128             /* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH     	11             /* 8, 9, 10, 11    */
+#define CONFIG_MEM_SIZE			128		/* 128, 64, 32, 16 */
+#define CONFIG_MEM_ADD_WDTH		11	       /* 8, 9, 10, 11	  */
 #define CONFIG_MEM_MT48LC64M4A2FB_7E	1
 
 #define CFG_MEMTEST_START		0x00100000	/* memtest works on */
 #define CFG_MEMTEST_END			0x07EFFFFF	/* 1 ... 127 MB in DRAM */
-#define	CFG_LOAD_ADDR			0x01000000	/* default load address */
+#define CFG_LOAD_ADDR			0x01000000	/* default load address */
 
-#define	CFG_SDRAM_BASE			0x00000000
+#define CFG_SDRAM_BASE			0x00000000
 #define CFG_MAX_RAM_SIZE		0x08000000
 
-#define	CFG_MONITOR_LEN			(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_LEN			(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MONITOR_BASE		(CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN)
 
-
-
-
 #if ( CONFIG_CLKIN_HALF == 0 )
 #define CONFIG_VCO_HZ			( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
 #else
@@ -289,14 +286,12 @@
 #define CONFIG_SCLK_HZ			CONFIG_CLKIN_HZ
 #endif
 
-
-
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_HZ				1000		/* 1ms time tick */ 
+#define CFG_HZ				1000		/* 1ms time tick */
 
-#define	CFG_MALLOC_LEN			(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MALLOC_LEN			(128 << 10)	/* Reserve 128 kB for malloc()	*/
 #define CFG_MALLOC_BASE			(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
 #define CFG_GBL_DATA_SIZE		0x4000
 #define CFG_GBL_DATA_ADDR		(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
@@ -309,25 +304,24 @@
 /*
  * Stack sizes
  */
-#define CONFIG_STACKSIZE        	(128*1024)      /* regular stack */
-
+#define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
 
 /*
  * FLASH organization and environment definitions
  */
-#define	CFG_BOOTMAPSZ			(8 << 20)	/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ			(8 << 20)	/* Initial Memory map for Linux */
 
 /* 0xFF, 0xBBC3BBc3, 0x99B39983 */
-/*#define AMGCTLVAL             (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
-#define AMBCTL0VAL              (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL |    \
-                                B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN)
-#define AMBCTL1VAL              (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL |      \
-                                B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN)
+/*#define AMGCTLVAL		(AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
+#define AMBCTL0VAL		(B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL |	\
+				B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN)
+#define AMBCTL1VAL		(B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL |	\
+				B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN)
 */
-#define AMGCTLVAL               0xFF
-#define AMBCTL0VAL              0xBBC3BBC3
-#define AMBCTL1VAL              0x99B39983
-#define CF_AMBCTL1VAL           0x99B3ffc2
+#define AMGCTLVAL		0xFF
+#define AMBCTL0VAL		0xBBC3BBC3
+#define AMBCTL1VAL		0x99B39983
+#define CF_AMBCTL1VAL		0x99B3ffc2
 
 #ifdef CONFIG_VDSP
 #define ET_EXEC_VDSP		0x8
@@ -336,5 +330,4 @@
 #define VDSP_ENTRY_ADDR		0xFFA00000
 #endif
 
-
 #endif